Household Care Formulary Spray & Wipe Hard Surface Greener Cleaner (No. 1091) Description: A ready-to-use spray and wipe cleaner that is suitable for all household hard surfaces. Spray on surface. Wipe with clean cloth. Trade Name/INCI Designation.................................. %w/w Water............................................................................. 96.2 BIO-TERGE PAS-8S1...................................................... 1.0 BIO-SOFT EC-6391........................................................ 1.9 Sodium citrate.................................................................. 0.8 NaOH (50%)................................................................... 0.1 Total:............................................................................ 100.0 Suppliers: 1Stepan Procedure: Charge Water and BIO-TERGE PAS-8S. With agitation, blend in BIO-SOFT EC-639. Continue mixing and slowly add NaOH. Add Sodium Citrate and blend until homogenous. Physical Properties: Appearance:........................................ Clear colorless liquid pH, as is: ..................................................................... 10–11 Viscosity, cps at 25°C: ...................................................... 15 Storage/Stability: Freeze/thaw, 3 cycles:..................................................... Pass 1 month at 50°C:........................................................ Stable 1 month at 5°C: ......................................................... Stable 1 month at 25°C: ....................................................... Stable Comment: Product is VOC compliant with all U.S. Federal and State VOC standards for general-purpose cleaning. BIO-TERGE PAS-8S and BIO-SOFT EC-639 are approved ingredients on www. cleangredients.org. BIO-SOFT EC-639 is a naturally-derived alcohol ethoxylate. Use of the term “green” or “greener” on the finished product or label is at the sole risk of the finished product manufacturer, for which Stepan bears no responsibility. Label and/or trademark usage of the final product is the sole responsibility of the finished product manufacturer. Source: Stepan 40 Spray September 2013 Eco Shower Shine HC/HS/45 Trade Name/INCI Designation.................................. %w/w Part A Alkyl polyglucoside.......................................................... 1.5 ModiSurf Clarity1 ............................................................ 1.0 Sodium bicarbonate......................................................... 0.5 Potassium hydroxide........................................................ 0.2 Benzisothiazolinone....................................................... 0.03 Citric acid (40%) solution.............................. q.s. to pH 7.0 Water............................................................................. 95.4 Apple Fresh2..................................................................... 0.2 Part B NatraGem S1401 ............................................................. 1.2 Suppliers: 1Croda 2CPL Aromas Procedure: Stage 1: Add the alkyl polyglucoside to the water and heat with stirring up to 40°C until the solution is homogeneous. Then add the remaining ingredients in the order listed using the 40% citric acid solution to adjust the pH of the formulation down to pH 7.0. Stage 2: Pre-mix the NatraGem S140 and the Apple Fresh fragrance together and then slowly add this to Part A with gentle stirring in order to avoid generation of foam. The solution might take five minutes to reach full clarity. Properties: pH:................................................................................... 7.0 Source: Croda Europe Ltd Home Care Plant-based Window Cleaner HC/HS/51 Trade Name/INCI Designation.................................. %w/w Part A Ethanol ............................................................................ 8.0 Ethanol............................................................................. 1.0 Decyl polyglucoside......................................................... 1.0 Sodium bicarbonate......................................................... 0.5 Benzisothiazolinone....................................................... 0.03 Water............................................................................. 89.5 Procedure: Add all of the ingredients in the order listed to the water, stirring until homogeneous between additions. Source: Croda Europe Ltd Home Care
SpraySep13
To see the actual publication please follow the link above